This Module is currently available.
Windows 10 / 11 / Linux mini DAW / DSP powerhouse / MIDI / CV Sequencer (reqires peripherals)
Ableton Live Suite looks good with 50 tracks showing on the touch screen!
84HP 65mm depth Lattepanda Sigma based module with
12-Core, 16-Thread, 12M Cache Up to 4.60 GHz (Performance-Core), 3.40 GHz (Efficient-Core)
32GB, Dual-Channel LPDDR5-6400MHz
· 2 x 2.5GbE RJ45 Ports (Intel® i225-V)
· 2 x USB2.0 Type-A (480Mbps)
· 2 x USB3.2 Gen2 Type-A (10Gbps)
· 2 x Thunderbolt™ 4 Type-C (40Gbps)
· HDMI 2.1, up to 4096 x 2304 @ 60Hz
· DP 1.4a via USB Type-C, up to 7680 x 4320 @ 60Hz
· eDP 1.4b, up to 4096 x 2304 @ 120Hz
· M.2 M Key: PCIe 3.0 x 4
· M.2 M Key: PCIe 4.0 x 4
· M.2 B Key: SATA III/PCIe 3.0 x 1, USB2.0, USB3.0, SIM
· M.2 E Key: PCIe 3.0 x 1, USB2.0, Intel CNVio
· Micro SIM Card Slot
Module will not fit in all cases. Monitor is 14 inches wide. You must use a Thunderbolt 4 hub to use an auxiliary HDMI monitor and subsequent USB hubs for peripherals. Power is fed from the rear of the module but not from the euro rail. Any connection can be made from the rear. The system fan is connected to the 12v rail only and has a step down transformer with numeric display that allows you to adjust the speed of the fan. It is not recommended that you set this over 5v output.
2TB m.2 drive included with speeds of up to 5200 mbps (see image in gallery above)
System cooling is forced fresh air direct to M.2 heat sinks, and heated main board air is directly vented to the front of the panel behind the screen. this ensures minimal hot air saturation in the case. It also doesnt matter if you have an air tight case or a few open spaces here and there.
If you have any questions, feel free to join our discord at https://discord.gg/mPCjuN8Emq
