Notes to self regarding this experimental rack:
- Case to be used: 8U 10,5 half-rack cabinet, i.e.: http://www.allmetalparts.co.uk/690-8u-105-half-rack-cabinet-435mm-deep-with-handles-5055726206217.html
- LEFT side represents front, RIGHT side represents back. Effective Eurorack HP yield is approximate
The idea is to make an entirely self-contained rescan setup to complement the direct video synth. The Cadet modules represent the basic functionality of a Rutt-Etra scan processor. Certain of them, i.e. Ramps, may be built as 1U tiles to make space for more fun Eurorack modules, i.e. oscillators, modulation or Castle-series modules. The currently shown 1U tiles are not necessarily the ones that will be used.
The 1340A has 9.5 rack mounting ears, but I intend to use a wider rack and simply mount it on a rack shelf to make it feasible to switch to other displays in the future.
The BOTTOM FRONT 1U row will contain mounting hardware (16mm stud) for the rescanning camera and connectors for video and power.
The REAR of the rack includes a TBC2 that will be used both for video input to the scan processor, and for synchronising the rescan camera feed and converting it to LZX 1V video for further processing. (I may try to find a cheaper solution as colour video is not really needed here)
Other available space on the back will be used for a drawer for storing the rescan camera and related cables, as well as power input (PowerCon) and video IO.