Dimensions
1 U
42 mm deep
Current Draw
10 mA +15V
10 mA -15V
5 mA 5V
Price
$420 Price in €

This Module is currently available.

Specs are approved by the manufacturer

Power sytem for MU modulars

The C100 Power System is the solution for powering your modular system.

The C100 Power System is composed of :

A C100 Power module, with the external PSU input , the on / off switch, the rail status leds but also it’s is a Voltage Sources module.
An universal external PSU (works from 100-240V and 50-60Hz)
A high quality internal DC /DC converter
A power distribution board
Power cables

The advantages of this kind of power system are:

    There is no dangerous voltages inside de cabinet.
    It’s much less heavy than a linear PSU , making the cabinets more portable
    Using a distribution board reduce to 0 the amount non used power cables inside the cabinet

The C100 Power System is really easy to install and not special tools are required ( just a screw driver ). A step by step installation guide is provided in the user manual.

The C100 Power System can provide up to an 1 Amp per rail (+/-15V ). The 5V are taken from the +15V rail (250 mAmp maximum). The 5V volts only use the amperage that it’s needed so if no modules uses the 5V rail no amperage is consumed and all is available at the 15V rail.

The C100 designed to power up to 24 modules, that it’s more or less a 32-36 spaces cabinet depending on the power consumption of each module and how many non-single-wide modules are installed on the system.

https://corsynth.com/home/modules/c100


submitted Apr 4th 2017, 08:32 by thalassa | last Change Aug 1st 2019, 07:14 by thalassa
Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.