Dimensions
3 U
58 mm deep

CP format

Current Draw
30 mA +15V
30 mA -15V
? mA 5V
Price
$265 Price in €

This Module is currently available.

Mixer

FUNCTION DESCRIPTION

The SWCP3 module is a 4 x 1 mixer with positive and negative outputs and a maximum gain of 2. This mixer can combine both AC and/or DC voltages.

This Module is based on the original design from 1968

The SWCP3H half size module has has the same function like the SWCP3 plus a multiple in addition.

MUSICAL APPLICATION

The four channel mixer is useful for combining several signals to form a single output. Audio signals from up to four different sources can be varied in relative volume before processing the mix through filters or amplifiers for a final result. Control voltages can be mixed, attenuated and phase inverted before being introduced into a voltage controlled module. In addition, the CP3 mixer can be used for phase cancellation of complex sounds, e.g. if two or more signals with similar frequency content are combined at opposite phase relationships and for feedback where the output of the mixer is sent directly back to an input of the CP3 mixer.

http://www.synth-werk.com/sw-cp3h-mixer.cfm


submitted Jun 21st 2017, 21:45 by StingR | last Change Nov 1st 2019, 21:57 by Trtlmnky