Dimensions
2 U
Current Draw
12 mA +15V
15 mA -15V
? mA 5V
Price

This Module is currently available.

Specs are approved by the manufacturer

4-Pole Low Pass CEM3320 Based VCF

The Tellun Corporation TLN-442 is a four pole low pass filter built around a Curtis Electromusic Specialties CEM 3320 chip. A built in mixer allows for three audio inputs. The filter frequency can be set using a panel mounted pot, a “one volt per octave” external control voltage, or via two external FM inputs with attenuators (one reversing). Filter resonance can be set using a panel mounted pot or an external control voltage with a reversing attenuator.

A four pole low pass filter built with a CEM 3320 was used in the Sequential Circuits Prophet Five (rev. 3) and Pro One synthesizers.

https://richsstudioproject.wpcomstaging.com/product/tln-442/


submitted Jun 30th 2021, 20:44 by Flareless | last Change Jun 30th 2021, 21:07 by Flareless
Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.

Canada

Lower West Side Studio

These merchants probably sell this module. Huh?