Dimensions
8 HP
63 mm deep
Current Draw
60 mA +12V
10 mA -12V
0 mA 5V
Price
$333 Price in €

This Module is discontinued.

Clarke VCM20

Midi to CV converter/calibration system

This self contained Eurorack expandable Midi to CV converter/calibration system offers an uncomplicated solution to the problems of tuning and scaling both vintage synthesisers and modern VCO Eurorack modules. With 16 bit voltage resolution and a tune time of 10 seconds. The unit can compensate for VCO alignment issues and environmental factors that cause tuning drift with the push of a button. Its Digital Automatic Audio Gain Control Circuitry (DAGCC) enables the unit to be connected to most synthesiser outputs, and has been tested on a large array of makes and models. While obviously not being capable of fixing the problems of faulty circuitry it will however save time and money on re–calibration, and ensure the technical side of synth ownership doesn't impinge on the creative process.

The VCM-20 also independently generates 5v for the VCS-20s on the control cable (not connected to Bus Board). As VCS-20s are added the power consumption of the VCM-20 rises by 20 ma per VCS-20 on the +12v rail.

http://www.vinceclarkemusic.com/circuits/


submitted Mar 19th 2015, 10:37 by Thievensee | last Change May 16th 2019, 14:12 by xtront

2 Users are observing this