Module is available as a DIY project only.
This Module is currently available.
2hp panel for BMC Logic
This module provides two channels of selectable Boolean logic functions for processing
synthesizer signals. Each channel has two inputs, “X” and “Y” and a single Gate output. The
output is on or off depending on whether the voltages on the two inputs are above (“ON”) or below
(“OFF”) 0.12V. This voltage was selected so that input voltages that alternated between 0 and 5V
or signals that went from -5V to +5V could be used.
There are six select able logic operations. When the operation select knob is fully
counterclockwise the AND function is selected, and as the knob is turned clockwise it then selects
NAND, OR, NOR, XOR and XNOR functions in that order.
These merchants probably sell this module. Huh?