Thanks Farkas!
I will check that one out.

Any other recommendations, anyone?


I am looking for recommendations for a super quiet powered case.

Currently, I have two Pittsburgh Modular Structure EP-208 cases but when maxed-out with modules they start to give off some noise.
Does anyone have any ideas for great quality 6U 104hp alternatives?

Thanks!


Senor-bling,
I just tried what you suggested and it is the same very high pitched whining.
Thanks for the advice anyway


Thanks very much Lugia for your generous advice, it's much appreciated!
I will look into the ferrite clips. Are there particular ones I should be getting?
When you say wind the card between the "brick" and the cab, what do you mean by that?
I'm unsure where to attach the clips.

I am using a 15V 3.34A power brick (as supplied) for the EP-96 case, which should be plenty of Amps to power both the SV-1 and Voltage Research Laboratory modules?

Thanks also Ronin1973, I will try to eliminate each module one by one.
My modular racks are plugged into separate power points from my mixing desk, so I don't think that should be the problem?


I have three different cases from Pittsburgh Modular, all of which are giving off a high-pitched whine.
Does anyone know how I can get rid of this?
Is it a power brick issue?

Here are the cases with modules in place at the moment:
ModularGrid Rack
ModularGrid Rack
ModularGrid Rack

The Pittsburgh Modular Voltage Research Laboratory is especially noisy beside the Lifeforms SV-1.
When I take out the VRL and only have the SV-1 in there, it is silent.

It's really frustrating to have such loud interference in the signal, after having spent a fortune on this equipment.
Any tips or solutions would be greatly appreciated.


Thanks for the reply.
I have a Make Noise Morphagene so I will look for a sample and put it through that.
Thanks again!


Does anyone know if there is a TR-707 snare module available?
I prefer the sound of the 707 snare to the 808 & 909.

Cheers


I am fairly new to the world of modular and gradually building my rig.
Just wondering if anyone can suggest great modules that would work with my current setup?
I have 22hp of space left and looking for anything that will enhance what is already there.

You'll need to click on the image to see the full setup. The rest of the modules aren't showing up for some reason.

Thanks!

ModularGrid Rack


Thanks for the replies.

I think you might be right that I've accidentally messed up the calibration.
I've tried to re-calibrate it following the instructions but it's not working.
I've emailed Erica Synths and will see if they can fix the issue.

Cheers!


I recently bought an Erica Synths Midi-CV V2.
The notes are coming through fine but when I play on the keyboard the notes are reversed.
For example, when I play C1 then C2 it sounds like C1 then C0.

Anyone have an idea of a possible fix?
Is it a possibility that the module has been wired incorrectly?


Fantastic, thanks for the great tips!


Hey Lugia,

Thank you very much for the advice, much appreciated!

I hear you regarding the AJH module but I'll probably just keep it and add it to the next skiff I just purchased.
I'll take your advice on the LFO and add that to the first skiff in place of the ADSR.
Doesn't the Make Noise Maths act as a good LFO, or do you recommend having both modules in the same setup?

Thanks again!


Hi everyone,

I am totally new to eurorack systems and building a 104hp rack.
Just looking for advice on the setup I intend to build.
Do I really need a mixer in this setup, as I have a VCA?
Would this be an effective setup?
How could it be improved?

Modules I have so far are:
Erica Synths Midi to CV, Wavetable VCO, Quad VCA, Pico DSP, Pico Output.
JH Audio DH-ADSR.
The others I have yet to purchase.

ModularGrid Rack

Thank you!