Dual Opto-FET Sample & Hold / Track & Hold module with random mode
C-310 Dual sample/hold – track/hold module (Opto-FET) with random mode.
Signal (to be sampled) input & output jacks, trigger/gate input jack + LED, s/h – t/h button + LED, all twice.
Sample/hold and track/hold modes are switchable from front panel button (short press), random sample mode selectable by long button push (can be switched to s/h and t/h in random mode too).
In random mode is input clock internally divided randomly (probability is 3 so in average every third trig/gate is used for s/h or t/h). Tracking LED shows incoming triggers/gates, sample LED lights at sampling/tracking.
Width: 4TE/ 4HP/ 20mm.
Depth: 50mm /2″ max.
Current: 35mA max.
Power cable included.
Double check power connection before powering your system please.
„Red strip“ means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.
No info about availability.$76 Price in € submitted Mar 2nd 2015, 21:55 by rf | last Change Dec 9th 2017, 18:19 by jmason
8 Users are observing this