4 HP
40 mm deep
Current Draw
20 mA +12V
0 mA -12V
0 mA 5V
$62 Price in €

This Module is currently available.

S-220 Dual Switch

Dual gated switch

S-220 Dual switch module for Eurorack/Doepfer A100 system.

From top:
mode button + LED (2x)
trig/gate input + LED (2x)
switch in/out jacks + LED (2x)

Switches can be used for audio switching (muting) or switching CV, switches are bi-directional. Switches can work in three modes – normal (switch is closed when input gate is active, mode LED is off), inverted (switch is opened when input gate is active, mode LED is dimmed) and toggled (rising edge of input trig/gate toggles switch state, mode LED is on). Input 2 is normalled to input 1, neighboring switch jacks are normalled too so both switches can be used together controlled by input 1. Due switch jacks normalling it can be set to 1-to-2 configuration (one input switched to two outputs) or 2-to-1 configuration (2 inputs to one output), then bottom jack of switch 1 should be common input/output, top jack of sw1 is one in/out, bottom jack of sw 2 is second in/out. One switch should be set to normal mode, another switch to inverted mode. Good companion to say U-075


submitted May 27th 2018, 20:40 by Lugia | last Change Oct 18th 2018, 09:19 by ParanormalPatroler

6 Users are observing this