LFO v2 (matte black)

Skewable LFO

A triangle and square wave LFO with four simultaneous outputs and waveform skew. The skew control at noon gives symmetrical output shapes (triangle and square). Adjusting the skew control will gradually morph the triangle into a positive or negative ramp, and will vary the pulse width of the square. The two sets of tri/sqr outputs are inverted copies of each other. If one waveform is up, the other is down. If one skews one way, the other skews the opposite. A three position toggle switch changes between slow, medium, and fast frequency rates. Frequency ranges from 0.009Hz (just shy of 2 minutes) to about 100Hz.

Specifications:
EURORACK 4HP
MATTE BLACK PANEL
REVERSE VOLTAGE PROTECTED
15MA @ +12V
15MA @ -12V
FAST: 1 – 100HZ, MEDIUM: 0.3 – 30HZ, SLOW: 0.009 – 0.9HZ
+/-2.5 VOLT OUTPUT WAVEFORMS
SKIFF FRIENDLY

http://noisereap.com/product/lfo_v2/