Available as an assembled Module and as a DIY project.
This Module is discontinued.
Black Panel
Loafers is four independent LFOs with rudimentary voltage control. Each LFO has three simultaneous outputs: triangle (+/-2.5V), square (+/-2.5V), and clock (0-6V). The “skew” control varies the shape of the triangle wave into a positive or negative going ramp, and varies the pulse width of the square and clock. The minimum cycle frequency is 0.0125Hz (80 seconds) and the maximum is about 45Hz.
Each LFO has a CV input which crudely controls the rate of the LFO. By adding positive voltage, the speed of the LFO increases. And by subtracting voltage, the internal capacitor charges slower and the LFO slows down. Depending on the speed of the LFO, and depending on the amplitude of injected CV signals, it is very possible to “override” the CV inputs and cause the LFO to predictably stall out. In this manner, the CV ins are used more as gated inputs to turn the LFOs on or off. Likewise, they can be manipulated as a sort of soft-sync, or coaxed into quasi-envelope shapes by balancing the rise and fall time until the LFO settles and stalls. Experimentation is a big part of using the Loafers.
Specs:
12hp eurorack
32mA @ +12V
13mA @ -12V
depth 22mm
output impedances ~1K
CV input impedance 220K, bipolar, DC coupled
Triangle output +/-2.5V
Clock output 0-6V
Sqaure output +/-2.5V
4 Users are observing this
