Dimensions
1 HP
12 mm deep
Current Draw
2 mA +12V
2 mA -12V
2 mA 5V
Price
$28 Price in €

This Module is currently available.

Specs are approved by the manufacturer

PWR Checker - now in RED :)

PWR checker is the perfect solution for filling your last 1 HP space! Now available with RED LEDs. PWR Checker gives you information about all power supply rail voltages in your case. Ideal to keep things in check and under safe conditions so you don't damage your power supply, your case, or in the worst possible scenario - your precious you! PWR Checker contains 3 LEDs (+12V, -12V, and +5V) placed on its front panel. The module itself is connected to your PSU or power distribution board. It is not only a simple resistor + LED circuit. PWR Checker's circuit shows the presence and dropout of supply voltages. If your PSU is working properly, all LEDs should light with the same intensity. But if the voltage of the PSU drops more than 1V, LEDs will go completely dark. PWR Checker (in comparison with standard resistor + LED circuits) can also show little PSU rail voltage deviations which can have a big influence on the function on a majority of modules. PWRchecker is available with green and red LEDs and also in black and white face panel.

Designed, manufactured, and assembled by hand at Konstant Lab - Slovakia.

https://www.konstantlab.audio/shop/pwr-checker-the-most-useful-1hp-module/


Ø 4.00 (1 Votes) Average Rating
submitted Sep 25th 2018, 16:39 by pole | last Change Dec 26th 2020, 01:44 by pole

3 Users are observing this