Fusion (Gold)

VCA with summed output and fader

Shown here in gold. This will also be available in copper.

Fusion is a mixer that acts as any four channel VCA but it also allows one to seemlessly fade 2-4 audio signals on a single control and even do it with cv. Touch-based selector allows the selection of 2, 3 or 4 inputs to be fused with the fusion control and sent to a single "mix" output. Touch-based selector over direction determines whether the fader/ moves clockwise or counter-clockwise in accordance with an incoming voltage signal. Applying sequenced voltage to fusion allows one to jump between incoming signals - basically creating a triggerable 4 track.

Other than that it's a straight forward and clean mixer with 4 inputs with controls over input level (with andio and peak indication lights), 4 independent outputs with cv control, single output with level control (and audio and peak indication lights, mix output for the fused signal.

Control
- 4x independent Input levels with audio and peak indication

• 4x independent Output levels with cv

• touch-based direction switch

• touch-based fusion selection (2-4)

• fusion control with cv

• output level control

• light indication for all modes and controls

Ins and Outs
- 4x input

• 4x output

• 4x output cv control

• sum out with audio and peak indication

• mix out for fusion mix

• cv over fusion

Specs
- includes mounting hardware and power connection in a beautiful folktek box.

• 12v = xma

-12v = xma

+5v = xma

width = 16HP

1" depth (skiff friendly)