Dimensions
8 HP
42 mm deep
Current Draw
20 mA +12V
0 mA -12V
0 mA 5V
Price
$80 Price in €

This Module is currently available.

M-221 MIDI to clock synchronizer

M-221 MIDI to clock module

M-221 MIDI clock:
– One MIDI input (DIN 5pin)
– 8 clock outputs: 1/4, 1/8dotted, 1/8, 1/16 dotted, 1/16, 1/32 dotted, 1/32 and “fine MIDI clock”= 24 trigs per quarter note
– 5 control outputs: start (trig), stop (trig), reset (trig), play (gate – active while playing) and start/stop (trig)
– LED blinks every quarter note to show MIDI clock is running

Width: 8TE/ 8HP/ 40mm.
Depth: 42mm /1,6″ max.
Current: 20mA max. from +12V only (no need for 5V rail)
Power cable included

Double check power connection before powering your system please.
“Red strip” means -12V connector side in Eurorack standards.
In some power distribution systems connector key can be reverted.
In this case cut connector key and plug power connector right way (with respect to red strip) or use different power cable appropriate to your power system.

http://ladik.ladik.eu/?page_id=2945


submitted Mar 27th 2020, 20:53 by bradovic | last Change Mar 29th 2020, 15:52 by motorhead412

5 Users are observing this