This Module is currently available.
Random Trigs/Gates
From the top down:
clock (for triggers) input jack + LED
clock (for gates) input jack + LED (normalled to trig clock)
setting button + 2 LEDs (short press sets probability low/mid/high, long press sets exclusivity)
three trig out jacks + LEDs
two gate out jacks + LEDs
R-112 generates random trigs and/or gates. Gate outputs can change their state with clock only. Density of generated trigs (and changing gate output state) is set by short button press (low/mid/high density). Density is common for both trig and gate sections. Exclusivity setting sets how many trigs (and gate changes) are generated at time: 0=no exclusivity, any number of trigs (and gate changes) generated at time, 1= just one trig or just one gate state can change, 2= one of trigger and one of gate change can be generated.
There are two internal jumpers, left jumper sets trig length (jumper header set = 5ms, removed = 1ms), right jumper can convert gate outputs to trigs (labeled T4, T5), jumper header set = gates, removed = trigs.
Two clock inputs (for trig and gate sections) allows using say divided clock to decrease gate state change as example (making long gates).
Width: 4TE/ 4HP/ 20mm
Depth: 37mm /1,5″ max.
Current: 25mA
Power cable included
5 Users are observing this
