No info about availability.
Divides input signal (clock, audio…) in selectable ratios (/2 to /16, /4 to /32, /8 to /64), other parameters configurable too.
Configurable parameters (by internal jumpers):
a) jumper 1: 1ms trig outputs (jumper set) or output gate length according to input gate length
b) jumper 2: jumper set = toggling outputs at each input clock (=gate length is time between pulses, this mode doubles division ratios /4, /6, /8, /12, /16, /24-32, jumper not set = output gate length according to input gate length
in „doubled“ division mode /8, /12, /16, /24, /32, /48-64)
c) jumper 3: „normal“ – or – „doubled“ (jumper set) division ratio (/2, /3, /4, /6, /8, /12 – or – /4, /6, /8, /12, /16, /24-32)
d) jumper 4: initial output state – first clock after reset makes all outputs active (jumper set) or waits for 2nd, 3rd… input pulse to make output active
e) jumper 5: last output jack division ratio setting /12 or /16 (jumper set) and its multiples according to other settings
Reset jack, input trig/gate jack + LED, 6 divided output jacks + LED
Width: 4TE/ 4HP/ 20mm.
Depth: 45mm /1,8″ max.
Current: 25 mA max. (from +12V rail only)
Power cable included.
8 Users are observing this
