Dimensions
21 HP
25 mm deep
Current Draw
23 mA +12V
? mA -12V
? mA 5V
Price
$449 Price in €

No info about availability.

Specs are approved by the manufacturer

Drum Wave Synthesis

This is the copper faced version of Matter. The other version is patina.
Both are functionally identical
On modular grid, the patina version can be found here: https://www.modulargrid.net/e/folktek-matter

More details, videos sound and direct purchase of Matter on the folktek site:
http://folktek.com/instruments/modular/matter_copper

"Matter" is drum wave synthesis. While it could simply be called a drum synthesizer, the method of play is designed equally as much to make the all-analog drum-based synthesis playable as waves as it is to make triggerable drum sounds. This means Matter can take a "kick" oscillator, for example, and use it to generate a bassline, a "snare" can create washes of noise with peaking resonance, and so on. This allows for a very broad complexity of rhythm because triggering is not confined to a single point. That said, this module specializes in clicks and cuts style beats - little clicky sounds - and by contrast, abstract sound scapes.

Matter is also very capable of generating complex drone and rich synthesis and does not need to be used as a drum synth at all. It utilizes the same analog synthesis as Materia which means it also works with aspects of deductive synthesis where noise and sound is "patched out".

Like most future Eurorack modules by Folktek, Matter utilizes an onboard patch system with its own patch cables (supplied). The purpose for this is to allow for more possibility while keeping things compact. With future add-ons, use of the patchbay will be optional and interchangeable. In this case, Matter has two primary patchbays (1-10 and 11-20 (incorrectly labeled 10-20)) which represent controllable access points within the circuitry for cv or gate signals to be applied (Each cv input has an led for voltage visualization). 20 access points each doubled for stacking input or creating direct patches. Up to a total of 8 cv/gate input jacks and an additional modulation cv/gate input are jumpered by the player to the main patchbay to generate sound. Hard patches (direct point to point) can be used to create layers, trigger multiple oscillators, generate drone and permanently alter the sound shape, filter or resonance.

Once a jumper patch is set up, it does not need to be changed...it's completely optional - each cv/gate input will be dedicated to a trigger. Cv/gate inputs can change and the trigger points will remain.

Because the inputs are jumperable, they can also be used in a variety of different ways other than direct cv triggering.

= Sound can be sent in to a few points on the Matter circuitry where it uses some of the pathways of filtration, overload and distortion.

= External audio or cv signals can be jumpered through the modulation.

Aside from the primary synthesis, Matter also has vactrol-based sine modulation which can be used in a number of ways;

External audio can be patched into "mod trig cv" which sends the audio through the vactrol modulation. That audio can then be jumpered into the circuitry where it will be filtered, distorted or effected in any number of ways. Or, for a clean modulation the audio can be jumpered to another jack and output.

Matter audio output can be sent through the modulation and jumpered to a new jack.

External cv can be patched to the "mod trig cv" jack and jumpered to the main patchbay to have a modulated cv signal activating the synthesis. Or likewise, the cv signal can be jumpered to a jack to simply pass through the vactrol modulation.

Mod cv out outputs the modulation control voltage independant of the vactrol.

Modulation has speed control dial, cv speed (vactrol), input ("mod trig cv" vactrol) and cv out.

Volume control and mono output.

http://folktek.com/instruments/modular/matter_copper


Ø 4.33 (12 Votes) Average Rating
submitted Mar 5th 2016, 03:59 by folktek | last Change Mar 6th 2016, 05:08 by folktek

15 Users are observing this