4x4 CV controlled matrix mixer

Clump is a 4x4 CV controlled matrix mixer (MM). This means there are 16 VCAs on-board along with 4 mixers. It can be used as a regular mixer if you prefer. The gain pots can boost a signal to approx. 2x.

This started out as a half-sized version of the Cluster (8x4 MM), but I changed a few things that oft bugged me on the Cluster and implemented some suggestions. Each VCA gets a 1k trimpot to remove any offset voltages, each input gets a switch to turn off or invert the incoming signal and the pots act as gain pots with no CV patched in and as attenuators when CV is patched.

power tested with a test3 under light use

https://www.nonlinearcircuits.com/modules/clump

  • 53 mA +12V
  • 36 mA -12V
  • 0 mA 5V
  • Ø 5.00 (1 Votes) Average Rating

Available as an assembled Module and as a DIY project.

This Module is currently available.

$300 Price in €
24 HP MixerVCA
submitted Apr 8th 2020, 15:23 by AndrewF | last Change Aug 12th 2020, 15:59 by AndrewF
Specs are approved by the manufacturer

19 Users are observing this