Shuttle Control Offer Details


12 bit USB-to-MIDI-to-CV converter, PSU for a Shuttle full of modules, host for class compliant MIDI-Devices, …

  • 200 mA +12V
  • 100 mA -12V
  • 35 mm Depth
12 HP MIDIPower
Go to the Module Detail Page


ENDORPHIN.ES SHUTTLE CONTROLThe Shuttle Control is a configurable USB-MIDI to CV/Gate converter with sixteen assignable channels. USB keyboards or other class-compliant USB MIDI devices can be conveniently connected via Shuttle Control’s front panel USB sockets. An additional micro socket is available for connecting a tablet or other compatible non-MIDI devices, users can even connect to their MAC/PC. Shuttle Control also doubles as a power supply and power distributor with an internal MIDI/CV buss. It is capable of supplying power to an entire row of modules, or a small Eurorack system. The module can supply up to 1000mA from the +12V rail, 600-700mA from the -12V rail, and 1000mA from the +5V rail. Users should take special care to calculate the total power consumption before attempting to power their modules. The module also features two 12-bit digital-to-analog converters, each multiplexed into eight channels, with a per-channel sampling rate of 10kHz. Consequently, each CV output is assignable to any MIDI message, which can then be converted into an analog voltage or pulse sequence.SHUTTLE CONTROL Shuttle Control 12-Bit USB-MIDI-CV Converter and Power Supply + Power Distributor module16 Channels of Assignable Outputs with LED Indication for eachSelectable Pitch Modes to work with formats and CV scales: 1V/Oct, 1.2V/Oct, or Hz/VSimultaneous USB on-the-go device and host modes using 120 MHz 32-bit ARM Cortex™-M3 CPUSuper slim & therefore Shuttle friendlyInternal PSU capable of working from cigarette lighter receptacles, rechargeable batteries or 12-20V AC-DC power adapterNo drivers are required for a direct connection to your MAC/PC or iOS devicesUp to 8 voices of polyphony, polyphonic key aftertouch, no steps in CC voltages, MIDI clock, Tap Clock and many more MIDI events can be translated into CVSwitched mode PSUWeb-based editor for editing presets1 Micro USB socket (to device)2 USB type B sockets (to host)1 inlet for external 12-20V DC Center-Positive Power Supply (Power supply isn not included)Front Power SwitchSingle Character Display2 Buttons for toggle and navigation of settings Shuttle control

This offer was fetched from You cannot contact the seller via ModularGrid. You have to visit their site.

Look up on

Disclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.

Don't pay via PayPal Friends and Family if the seller is not your friend or family!

If you think an offer sounds suspicious please report to