A-111-2v

Doepfer Offer Details

Created
Modified
Price
$299.00  
Seller
 
Region
USA  

High end VCO (Vintage edition)

  • 70 mA +12V
  • 50 mA -12V
  • 55 mm Depth
Go to the Module Detail Page

Description

  Module is in great shape and perfect working order. 

Has original box

Manufacturer Description:
Module A-111-2 is the successor of the obsolete High End VCO I A-111-1.Here are the most important features of the planned module: triangle core fully analog design min. 15 octaves pitch range (typ. 0.5Hz - 20kHz in VCO mode / 0.001Hz - 40Hz in LFO mode) perfect 1V/octave tracking over min. 10 octaves (typ. 20Hz - 20kHz) exponential frequency controls and inputs: Tune (about +/- 1 octave range) Fine (about +/- 1 semitone range) Octave (range switch with 6 positions) 1V/octave CV input XFM input with attenuator access to internal bus CV (via jumper, optional, please remove the bus jumper if this feature is not used to avoid unwanted frequency modulation as then the unused CV line of the bus works as a kind of antenna) linear frequency controls and inputs: LF (manual linear frequency control: fully CW = standard setting for usual VCO applications, fully CCW: close to 0Hz frequency) works also as a kind of range control for the exponential section LFM input with attenuator, DC coupled Pulsewidth controls and inputs (for rectangle output): PW (manual pulsewidth control from 0%/output = fixed at "low" state up to 100% / output fixed at "high" state) PWM input with attenuator Hard Sync input (CEM3340 hard sync type) Soft Sync input Waveform outputs: Sawtooth Rectangle (controlled from pulsewidth section) Triangle Sine Range switch to select VCO/VCLFO mode, frequency relation between VCO mode and LFO mode about 1:500 dual color LED display (to display low frequencies below ~ 25 Hz) Nearly "perfect" waveforms high end triangle to sine converter with excellent sine waveshape (thank's to Tim Stinchcombe who recommended this circuit) the micro precision VCO A-111-3 uses the same VCO core as the A-111-2, but has less inputs, outputs and controlsComes with full manufacturers warranty

Doepfer A-111-2V

This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.

Look up on

Disclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.

Always prefer having Buyer Protection when you make a purchase using PayPal. Don't use Friends & Family unless the seller is your friend or family!

If you think an offer sounds suspicious please report to info@modulargrid.net