If you had an Unicorn Account you could see a chart with the price development of this module and the average price asked for this module.
The slightly larger brother of the Dixie II is built around the same triangle core yet it has some additional features which make it more versatile. Octave switch, a fine tune control, control of PWM intensity, enhanced FM section and one special inverting sync input. So, if you're looking for a full-fledged primary oscillator - here it is! The oscillator frequency is set by a eight-position octave switch, a fine tune control and by a switch selecting between LFO and audio rates. For modulating the frequency by CVs there are a 1V/octave input, the exponential FM2 input as well as another FM input with scalable modulation intensity and which can be used wither as a linear or exponential FM input. The initial pulse width is adjusted with the PWM control between 10% and 90%. Via the attenuated PWM input it can be modulated by a ±5V control voltage from 0% to 100%. Oscillator synchronisation can be done in two different ways: SYNC resets the VCO to zero when the input wave crosses zero; via FLIP the oscillator changes its direction of travel. Besides the four standard waveforms sine, triangle, pulse and sawtooth there's also a zigzag wave and a sub-oscillator which outputs a pulse with 50% duty cycle, swinging one octave below.
This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.Look up on
Disclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.
If you think an offer sounds suspicious please report to email@example.com