Dimensions
8 HP
38 mm deep
Current Draw
22 mA +12V
22 mA -12V
0 mA 5V
Price

Module is available as a DIY project only.

This Module is discontinued.

LFO, Slew limiter and Envelope generator by KYMATICA DEVICES

(See LFO/SLEW/ENV 1.1 for the current version)

One module, three functions.

The LFO is a typical standard LFO with saw-tri-ramp shape, as well as
a pulse/square output.

The slew limiter allows linear or typical RC-curve slew limiting.

The envelope generator has two modes: ASR and ADSR. The sustain knob
controls the S level. The shape knob controls the balance between A
and D/R. So D and R has the same time, just like on the minimoog. In
ADSR mode, the attack phase always finishes even if the trigger/gate
is shorter, this makes it possible to use as a clock divider or
"subharmonic generator". ADSR mode with S at max gives an ASR but
where A always finishes, S at min or if gate input is shorter than A
time, gives an AR where A always finishes.

So the shape knob affects the waveform shape for all three functions.
Same with the rate knob and range switch.
The lin/log switch affects both the slew limiter and envelope
generator. (it needs to be in LIN position for the LFO).

The RISE/FALL outputs put out a high gate when the output is rising or
falling, and works for all three functions.

www.kymatica.com/hardware


Ø 5.00 (1 Votes) Average Rating
submitted Aug 22nd 2019, 08:57 by kymatica | last Change Sep 15th 2019, 14:30 by kymatica
Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.