Dimensions
6 HP
30 mm deep

Module is a 1U tile in Pulp Logic format

Current Draw
80 mA +12V
80 mA -12V
0 mA 5V
Price
$35 Price in €

This Module is currently available.

DC Coupled Driver Tile

The DRV is a DC coupled driver for experimenting with external devices. It can be used for driving tiny motors, analog meter movements, little speakers, exciters, coils, LEDs, ETC.. The DRV uses a duel-concentric potentiometer where the top knob sets the attenuation of the input signal and the bottom knob sets the DC offset. The offset control is bipolar so when set counterclockwise the output is at -5V when full clockwise the output is +5V. The maximum current drive is limited to around 70mA and the max consumption on the +/-12V rails is 80mA. The actual current consumption is dependent on the load being driven but the 80mA number should be used for power supply calculations.

http://pulplogic.com/product/drv/


submitted Jun 10th 2019, 14:04 by pulplogic
Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.

USA

Perfect Circuit

These merchants probably sell this module. Huh?