Available as an assembled Module and as a DIY project.
This Module is currently available.
The Shock Electronix "The Power" is powerful utility module, that can deliver up to 2.5A on both the +12V and -12V rails (approx 5A max)
The Shock Electronix The Power is powerful utility module, that can deliver up to 2.5A on both the +12V and -12V rails (approx 5A max), therefor making it suitable for a small start-up system, to a much larger sized system.
The Power is by far the most important building block you will need in order to run a Eurorack system……. If there is No power, then there is No fun!
The Power, was designed to adapt to different Eurorack setups. It can connect directly to most conventional passive busboards via the 1/4" quick-connect spade terminals (-12V, 0V and +12V). Or with the spade terminal adaptor board (included), it can connect to a 16-Pin IDC ribbon cable and "flying" busboard.
Options:
The Power is available to buy as -
A Fully assembled module, ready for instant plug ‘n’ play, no mess, no fuss....
A Complete DIY kit, which includes the Front Panel, PCB/s and Parts.......... The assembly build is up to you. (Assembly Guide is offered, but technical support is limited)
Specifications:
Width: 6hp
Max Depth: 27mm (35mm with spade adaptor fitted)
Approx. Power Rating: Input Power 12VDC @ 5A max
-12V Output 2.5A maximum
+12V Output 2.5A maximum
Input Connector 2.1mm DC, tip positive
Endorphin.es Endorphin.es Power
Endorphin.es Power
Endorphin.es Power - Black
Behringer BEHRINGER CP1A SYSTEM 55
Endorphin.es Power - Eurorack PSU
Endorphin.es Power