Kermit Mark III

IME 2063 - 4-channel Programmable Supermodulator

Overview

Kermit is a 4-channel programmable supermodulator with morphing wavetable generator and internal modulation matrix. Four channels operate as LFOs, audio rate oscillators (with 1v/octave response on two channels), 1-shot envelopes, random voltage generators, or sample-and-holds, all responding to manual control, external control voltages, or synchronization to the module’s master tap tempo clock. Designed for maximum patching power in small systems, Kermit carries an unmatched functionality-per-HP factor with an easily readable display that shows parameters in their real-world units.

The module has a 16-bit DAC to accurately render subtle changes of voltage at extremely low frequencies. The oscillator mode is best suited for bass frequencies, and the waveform “character” modes restrict the morph behavior or degenerate the audio to a minimum of 8 bits with limited horizontal resolution, like the Konami SCC chip used with the MSX computer. The tap tempo facility features an input jack and a manual button. The tempo is shown on the OLED display in BPM. The relevant units (hertz, seconds, volts, etc) or selected waveform of each channel are contextually shown on the display as the user programs the module.

LIST OF OPERATING MODES PER CHANNEL

• LFO (1 volt/octave)
• LFO (with reset)
• Tap tempo LFO
• Audio oscillator
• Audio oscillator (unison)
• Code scan
• 1-shot envelope
• Gated repeat envelope
• Tap tempo envelope
• Smooth random
• Stepped random
• Tap tempo stepped random
• Sample-and-hold
• Track-and-hold
• Tap Tempo sample-and-hold

Three parameters on each channel can be modulated: frequency, amplitude, or waveform. Both external CV input and internal cross modulation are programmable with hotkeys. For example: assign the output of Channel B to morph the waveform of Channel A by holding the Channel B button while turning the Channel A Waveform knob. All channels have manual control of frequency (coarse and fine), phase, wave bank, waveform morph, and amplitude. Channels A and B have full controls, C and D have single knob controls with deep parameters accessible by hotkey combinations. Still deeper functions are accessible through the Mark III menu system.

LOADING CUSTOM WAVEFORMS

Kermit has a microSD card slot for loading custom waveforms, like its big brother Piston Honda. The SD card accepts one .WAV file in WaveEdit format (free software editor) containing 64 waveforms, also compatible with several other Eurorack modules. When loaded into Kermit, the waveforms are organized into 8 banks of 8 waveforms each. Each oscillator can select any of the 8 banks, and the 8 constituent waves can be smoothly morphed from one to another.

MORPHING PRESET MANAGER

The Mark III morphing preset manager is in full effect on Kermit. The discrete preset mode quickly and reliably recalls all parameters in response to triggers or CV, accessing the true power of the module as detailed, carefully programmed settings are effortlessly loaded and changed. The morphing mode causes delightfully unexpected variations of the basis preset.

MASTER CLOCK MODULATION MATRIX DISTRIBUTOR

Insert a master clock signal and you’re ready to go. Kermit is a reliable provider of endless rhythmically coherent modulation voltages and a reasonably competent “voice module” providing most common synthesis functions on each channel with an internal modulation matrix.

Manual
https://ime-assets.s3.amazonaws.com/uploads/manual/manual/34/kermitmk3manual_1.pdf

http://www.industrialmusicelectronics.com/products/24