Dimensions
7 HP
50 mm deep
Current Draw
70 mA +12V
60 mA -12V
0 mA 5V
Price
$205 Price in €

This Module is currently available.

Specs are approved by the manufacturer

P401 Poly-4 MIDI Interface

4-Voice Polyphonic MIDI Interface

The P401 Poly-4 MIDI Interface adds four-voice polyphony to your modular system.

It has a wide range of functionality in a compact form, including note outputs (with normalled pitchbend) featuring precision 12-bit DACs with a typical deviation of only ±1 cent (±0.001V) over ten octaves. The range of each note output can also be offset using trimmers on the PCB as desired.

Other outputs per voice include 5V gate and 10V velocity outputs. There is also a 4 PPQN Clock (5V) output and 10V modulation wheel output included.

Various modes include polyphonic, monophonic and unison. Polyphonic and unison modes can be mapped to MIDI channels 1, 3, 5 and 7 using jumpers on the PCB. Monophonic mode outputs four separate voices to outputs 1, 2, 3 and 4 on MIDI channels 1, 2, 3 and 4 respectively, allowing for multitimbral capability.

Polyphonic mode has two voice allocation algorithms that can be assigned with a jumper on the PCB, including lowest note (featured on the original Prophet 5) and round robin, allowing for different tonalities to be achieved.

Finally, the note priority for monophonic and unison modes can be switched on the front panel between last, highest or lowest.

Features

  • Adds four-voice polyphony to your modular system.
  • Features a wide range of functionality in a compact design.
  • One note output per voice, with precision 12-bit DACs with a typical deviation of only ±1 cent (±0.001V) over ten octaves.
  • Note outputs feature normalled pitchbend.
  • Each voice also has 5V gate and 10V outputs.
  • 4 PPQN clock output (5V).
  • 10V modulation wheel output.
  • Different modes including polyphonic, monophonic and unison.
  • MIDI channel for polyphonic and unison modes can be assigned to 1, 3, 5 or 7 using jumpers on the PCB.
  • Monophonic mode is mapped to outputs 1-4 via MIDI channels 1-4, allowing for multitimbral control.
  • Polyphonic mode features two voice allocation algorithms including lowest note and round robin.
  • Note priority for monophonic and unison modes can be changed between last, highest or lowest.
  • Ergonomic design.
  • Hand-built and tested in the UK.

https://www.wavefonix.com/product-page/p401-poly-4-midi-interface


submitted Jun 6th 2023, 15:53 by Wavefonix | last Change Jun 6th 2023, 15:53 by Wavefonix
Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.

USA

Perfect Circuit

These merchants probably sell this module. Huh?