This Pedal is currently available.
Filter-based preamp / Crossover pedal
The SUBQ is a powerful tone shaping tool and an ultimate bi-amping engine, that features an independent Level, a Frequency and a Resonance peak controls for both High-Pass and Low-Pass filters.
How exactly does SUBQ work?
Basically SUBQ divides and boosts the signal up to 20dB on both High-pass and Low-pass paths and routes it in three different outputs. This way you can simultaneously use high and low-frequency outputs, and have a mix of them both via the "Output" jack, which can be bypassed, giving you a clean (buffered) signal. So you can actually use the pedal as a pure crossover as well as a filter based pre-amp or as a standalone High-Pass/Low-Pass filter, all depending on your needs.
High-Pass and Low-Pass frequency knobs adjust the frequency at which the signal is rolled off, while “Resonance” knobs obtain variable sharp boost precisely at the cutoff frequency, replicating the natural pickup resonant peak and providing to the SUBQ it's unique and organic tone.
FEATURES:
LO-LEVEL - controls Low-Pass filter overall volume level. From +20dB to - infinity (with the SATURATION knob set to “0”)
LO-FREQ – Determines the Low-Pass cut off frequency. Adjustment range is 150Hz to 7kHz.
LO-SATURATION – Set the boost at the Low-Pass cut off frequency.
HI-LEVEL - controls High-Pass filter overall volume level. From +20dB to - infinity (with the SATURATION knob set to “0”)
HI-FREQ – Determines the High-Pass cut off frequency. Adjustment range is 150Hz to 7kHz.
HI-SATURATION – Set the boost at the High-Pass cut off frequency.
SPECIFICATIONS:
Bypass : (Buffered)
Input Impedance : 1M
Preamp Output Impedance : 22k
Low-Output Impedance : 22k
High-Output Impedance : 22k
HI-LEVEL : +20dB
HI-FREQ : 150Hz – 7kHz
HI-SATURATION : up to 10dB boost
LO-LEVEL : +20dB
LO-FREQ : 150Hz – 7kHz
LO-SATURATION : up to 10dB boost
Maximum Level : 4,5 V RMS
Current Draw : 70mA
Dimensions (L W H) : 120 X 110 X 55 mm
Weight : 370gr
