ModularGrid uses so-called cookies to ensure it's so-called functionality. We also use dubious tracking scripts. Find out more in the Privacy Policy. We use cookies and wanna let you know.
Got it.
500 Series Mono VCA Compressor Limiter
http://dbxpro.com/en/products/560a
Go to the Module Detail PageIf you had an Unicorn Account you could see a chart with the price development of this module and the average price asked for this module.
Short Description:This quick and smacky 500 series compressor is an automatic punch enhancer for your drums, bass and more! In Used, Excellent ConditionManufacturer Description:The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to our 900 Series and the 560A continues that tradition.
Featuring the same switch-selectable OverEasy® and Hard Knee compression curves as our industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! It’s also versatile enough to go from subtle compression to "brick wall" peak limiting.
Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560A's Hard Knee compression and high ratios for bombproof protection against overload distortion in digital recording, P.A. systems, and broadcast signals.
The 560A's 19-segment, switchable Input/Output LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the dbx 560A's unique "INFINITY +" inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds the threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway mix levels.
Load up your 500 Series rack with some dbx 560A Compressor/Limiters and go to work!Specifications:
Specifications
Input TypeElectronically balanced/unbalanced, RF filtered
Input Impedance40kΩ balanced, 20kΩ unbalanced
Maximum Input Level+22dBu
CMRR>40 dB; typically >55 dB at 1 kHz
Output TypeElectronically balanced/unbalanced, RF filtered
Output ImpedanceBalanced 30Ω , unbalanced 15Ω
Maximum Output Level+22dBu
Frequency Response20 Hz – 20 kHz, + 0/-0.5 dB; 0.5 Hz – 100 kHz, +0/-3 dB
Noise<-97 dBu, Unweighted (22 Hz – 22 kHz)
THD+Noise<0.005% typical, No compression, 1 kHz input at 0 dBu; <0.07% typical, Any Amount of Compression up to 40 dB @ 1 kHz
Dynamic Range>119 dB
Compression Gain Adjustment RangeVariable from -20 dB to +20 dB
Compressor Threshold Range-40 dBu to +20 dBu
Compressor Threshold CharacteristicSelectable OverEasy® or Hard Knee
Compressor RatioVariable 1:1 to ∞ :1 thru to -1:1; 60dB Maximum Compression
Compressor Attack TimeProgram-Dependent; Typically 15ms for 10dB, 5ms for 20dB, 3ms for 30dB
Compressor Release TimeProgram-Dependent; Typically 8ms for 1dB, 80ms for 10dB, 400ms for 50dB; 125dB/Sec Rate
Power Requirements+/- 16VDC
Current Draw60mA per power rail
Power Draw1.92 watts
Rack System Compatibility500 Series Compatible Power-frame
Rack Space1 Slot
Dimensions (H x W x D)5.25” x 1.5” x 6” (13.34cm x 3.81cm x 15.24cm)
Weight1.3 lbs (0.59 kg)
Shipping Weight 1.7 lbs (0.77 kg)
This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.
Look up onDisclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.