Post

headphone dongle wont' really help except for audio - for low frequencies you'd still need a dc-coupled interface and a usb dongle for the phone - nb you only get 2 channels this way

I'll just get myself one of those dongles for €10 and see if it does what I need. I also noticed that my Zoom H2n has a built-in tuner, but that's microphone based.

having mostly been in the same situation for most of my adult life, I've never had an issue being in front of a computer for a bit longer in order to do stuff I want to do - use a DAW, etc and for a long time if I wanted to watch any tv or movies it was also in front of a computer...

I hear you! And I have done the same. I find it very tiring. I'm aiming to be a bit more "Look mum no computer". Even if I don't use it all the time, it'll still be there to turn ideas from the modular into songs.

Yes, but at least they're velocity sensitive, unlike the SQ-64.

not via the trigger outs they're not - via midi they are I guess - never used mine other than via cv though

Oh blimey. I was actually eyeing the Digitakt as well, also because it'll be a fun standalone machine that I can take to family holidays without taking over the whole car booth. One of the reasons I took it off my list is the velocity sensitivity.

With modulation, I meant wave modulation actually. I agree that LFOs are better kept separate. It's why I have the A145-4 in there. LFOs serve one purpose, VCOs another and as with my short rant about O&C, I don't like tools that mix up purposes.

I don't really see any wavetable oscillators - I think I'd want a more ergonomic quad lfo...

Good point about the quad LFO. It also doesn't have a sine wave. As for the VCO - wavetable isn't necessary to do modulation. There's ring and FM etc that can all be done with two VCOs. I might actually want lots more VCOs if I'm going that route!

temps utile, random triggers, clock divider and multiplier, buffered mults and harmonaig all seem a little superfluous - you have 8 trigger outs and 2 cv/gate/velocity outputs (all with probability iirc) on the BSP and no percussion and only 2 vcos in the rack...

I am going to do percussion based on the noise generators.

I was thinking of using the Temps Utile, clock & random bits to to the rythm, but you're right - all of that is in the BSP... It's going to be much easier to control it all from there instead of programming it on the modular itself! It seems like I was walking on two parallel paths at the same time. It'll save me serious money that I can put towards a Maths.

And the Harmonaig - yeah, I'll need more VCOs if I want to use that at all...

in the larger rack - the droid stuff seems to be in a similar place - the chipz I would replace with a Maths, the 2 dvcas I'd replace with a veils - and I'm not convinced of the need for 2 dplrs - and I'm not convinced about the mix solution - no panning and no send/returns...

Yeah, that stereo bit... Always feels like a good idea to me, but I'm starting to feel it's not in its right place here. I'm going to keep it mono and do the stereo part in the DAW afterwards.