1 HP
Current Draw
60 mA +15V
60 mA -15V
50 mA 5V
$212 Price in €

This Module is currently available.

Specs are approved by the manufacturer


The Q148 VCA++ combines a normal VCA, a left-right panner, a clipping monitor, a tuner, and a headphone amplifier all in a single-space module. The Q148 VCA++ makes a great final output module for studio or live work.

The VCA section operates like the Q108 VCA with both manual and voltage control. When patching in a control voltage, the VCA knob becomes an attenuator for the control voltage and essentially becomes your volume control.

The panning section gives you manual or voltage control of where the sound goes - left and/or right. Patch in an LFO to bounce the sound back and forth, or use an envelope to move the sound from one side to another for each note.

The tuning section provides an A (440hz) or C (523hz) standard for setting oscillators. It's super convenient and you might even find creative uses for it within your playing. The center position is off.

An LED indicates when the signal is getting close to the natural clipping level of the internal circuits to prevent distortion and help you set proper levels for the best signal-to-noise ratio.

The Q148 has a built-in stereo headphone amplifier with a volume control. As with any headphone amplifier, always start at the zero setting and slowly increase the volume to a safe level.


Ø 4.00 (1 Votes) Average Rating
submitted Jun 21st 2017, 21:06 by DotComOfficial | last Change Sep 10th 2018, 14:38 by DotComOfficial

1 Users are observing this