Dimensions
73 mm wide
129 mm high
Current Draw
14 mA / 9 V DC / Negative Center
Price
$100 Price in €

This Pedal is discontinued.

BF-2B Bass Flanger

Bass Flanger

By optimizing the BF-2 circuit for a lower frequency band, the BF-2B Bass Flanger was born. The Bass Flanger was not directly replaced when the BF-2B production stopped. After almost 10 years Boss replaced it with the BF-3.

The BF-2B Bass Flanger adds swirling and dynamic effects to the bass sound. The bass fundamentals remain untouched as flanging is added to the harmonics only. The LFO (Low Frequency oscillator) is variable between 100ms and 16 seconds and this gives a wide specter of flanging sounds. The MANUAL knob controls the delay time, the DEPTH knob controls the sweep range, the RATE knob sets the sweep speed and the RESONANCE knob sets the amount of feedback desired.

Specifications
Controls: Manual, Depth, Rate, Res
Connectors: Input, Output, AC Adaptor
Current Draw: 14 mA (DC 9V)
Weight: 400 g (15 oz.)
Input Impedance: 470 kOhm
Residual Noise Level: -95 dBu (IHF-A, Typ.)
Recommended Load Impedance: 10kOhm or greater
Delay Time: 0.5 ms ~ 6.5 ms
LFO Speed: 100 ms ~ 16 s
Recommended AC Adaptor: ACA Series

Labels
Green – Made In Japan
Green – Made In Taiwan
The BF-2B was sold from February 1987 to November 1994.

http://www.bossarea.com/boss-bf-2b-bass-flanger/


submitted Jul 21st 2017, 21:06 by icjburke | last Change Dec 13th 2019, 21:05 by motorhead412
Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.