Dimensions
64 mm wide
117 mm high
Current Draw
3 mA / 9 V DC / Negative Center
Price
$104 Price in €

Available as an assembled Pedal and as a DIY project.

This Pedal is discontinued.

FET-based distortion

The Monarch Overdrive is an all discrete, FET-based dirt machine. It’s designed around the input stage of a vintage amp produced by a company that bears the same name as the color of the monarch (hint…). It has been configured to produce higher gains that sound very open and free of unnatural compression. The Monarch gives big bottom end with a snappy, bright top at all gain ranges with some careful tuning of the treble and bass controls. The treble and bass controls function as frequency boosters, not the traditional roll off filters in most overdrives. They are located in the preamp section and have a large impact on the over all tone, nature and distortion characteristics. If you are looking for an overdrive for big fat chords with excellent low end retention, this is it!

https://www.earthquakerdevices.com/monarch


submitted Oct 20th 2018, 05:12 by bigmak93 | last Change May 10th 2023, 14:44 by motorhead412
Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.