Pedal is available as a DIY project only.
This Pedal is currently available.
Klon Boutique Transparent Overdrive Clone
You know what it is, and you know you want one. FuzzDog Labs have made it as simple as possible to get yourself a slice of creamy OD pie. Kits now supplied with parts for the Gold versions and the Silver Pony version as reversed by BYOC, including what they claim to be the mythical 'unicorn tears' diodes. Nice work! (Note: not the 10KB volume pot - only 10KA supplied).
All new version with board-mounted vertical-pin pots (with round shafts) for even easier build. These are highly recommended but you can opt to wire in normal pots (splined shafts) if you prefer..
Footswitch daughterboard has an optional on-board mini slide switch to choose between buffered or true bypass. You can leave this out and hardwire either option, or you could have an off-board switch if you prefer external control.
On-board charge pump. The circuit works at 18v from your standard 9v supply, giving you all the extra headroom of the original pedal.
Minimal off-board wiring. The two PCBs connect with a 6-way ribbon cable (unless you want to wire them another way - up to you). The only other wires are to the jacks and DC.
Extra capacitors supplied to add some bass to both the clean and drive sections, as well as a bigger cap to make the Treble control a bit nicer.
It all adds up to be the simplest build of this circuit there is (though it is a beast), and it all fits into a standard 1590B enclosure in a vertical 3-knob format. Note: Pots have round shafts so you'll need knobs with set-screw fitting.
https://shop.pedalparts.co.uk/Klone_-_boutique_transparent_overdrive/p847124_10612129.aspx
