If you had an Unicorn Account you could see a chart with the price development of this module and the average price asked for this module.
By optimizing the BF-2 circuit for a lower frequency band, the BF-2B Bass Flanger was born. The Bass Flanger was not directly replaced when the BF-2B production stopped. After almost 10 years Boss replaced it with the BF-3.The BF-2B Bass Flanger adds swirling and dynamic effects to the bass sound. The bass fundamentals remain untouched as flanging is added to the harmonics only. The LFO (Low Frequency oscillator) is variable between 100ms and 16 seconds and this gives a wide specter of flanging sounds. The MANUAL knob controls the delay time, the DEPTH knob controls the sweep range, the RATE knob sets the sweep speed and the RESONANCE knob sets the amount of feedback desired.SpecificationsControls: Manual, Depth, Rate, ResConnectors: Input, Output, AC AdaptorCurrent Draw: 14 mA (DC 9V)Weight: 400 g (15 oz.)Input Impedance: 470 kOhmResidual Noise Level: -95 dBu (IHF-A, Typ.)Recommended Load Impedance: 10kOhm or greaterDelay Time: 0.5 ms ~ 6.5 msLFO Speed: 100 ms ~ 16 sRecommended AC Adaptor: ACA Series
This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.
Look up onDisclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.