Dimensions
1 PU
46 mm deep
Price

This Module is currently available.

Specs are approved by the manufacturer

Bidirectional sequential switches for audio and CV

The DSS is intended as a companion for the Buchla 245/246 sequencers and other "quad" modules in Buchla format such as the 281 and 292. New possibilities for performance and composition arise from the ability to dynamically route multiple sources to multiple destinations without repatching.

The main I/O is bidirectional, meaning that the module works as a 4:1 multiplexer or a 1:4 demultiplexer. Patch up to four signals to the inputs labeled 1-4 and they will be sequentially routed to the common I/O jack. Alternately, patch one signal source to the I/O jack and it will be sequentially distributed to the 1-4 jacks.

Each half of the module has its own independent loop length (from 1 to 4 steps) and sequencing mode: forwards, backwards, forwards and then backwards (pendulum), or random. The SC output (Step Change) generates a trigger whenever the sequence length is changed, which is useful for synchronizing the upper and lower halves of the module or communicating state changes to other modules. The analog CV addressing input (ADDR) bypasses pulse-based control and allows an external CV source to select which step is active, similar to the "analog" CV input on the Buchla 245/246.

These extensive control and sequencing options make the DSS one of the most fully-featured sequential switches available in any modular format.

https://1979.ws/dual-sequential-switch


submitted Jul 9th 2017, 04:28 by 1979 | last Change Feb 23rd 2023, 18:47 by 1979

4 Users are observing this

Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.

Australia

Found Sound

These merchants probably sell this module. Huh?