Two LFOs

Dual VC Lfo module.

Features :

• LFO A :
• Continuous VC morphing between waveforms : sine, triangle, saw and square
• Output is selectable to be bipolar or unipolar
• Pulse output with variable pulse width.
• lo range : 0,001 (1000 sec) - 1 Hz
• hi range : 0,1 (10 sec) - 100 Hz, up to 1600 Hz with multiply * 16
• lfo range : 0,2 (5 sec) - 20 Hz, fine control thanks to the limited range of 100:1
• int mode : internal oscillator with exponential fm
• listen mode : external listen input with threshold sampled/held or tracked with multiply / divide
• tap mode : tap tempo with multiply / divide
• multiply divide uses 1/4 note as default, range is from 1/64 note to 4 whole notes with dotted notes and triplets
• in listen and tap mode, fm works as phase shift

• hard sync input

• LFO B :

• Selectable waveforms : sine, triangle, saw, ramp and square plus random
• Output is selectable to be bipolar or unipolar
• A + B output : output A plus a VC controlled portion of output B
• lo range : 0,001 (1000 sec) - 1 Hz
• hi range : 0,1 (10 sec) - 100 Hz, up to 1600 Hz with multiply * 16
• lfo range : 0,2 (5 sec) - 20 Hz, fine control thanks to the limited range of 100:1
• int mode : internal oscillator with exponental fm
• slave mode : follow LFO A with multiply / divide
• multiply divide uses 1/4 note as default, range is from 1/64 note to 4 whole notes with dotted notes and triplets
• in slave mode, fm works as phase shift
• hard sync input

• am and fm input normalled to output of LFO A

• General :

• All settings are automatically saved when powered off, and restored when powered on again.
• Skiff friendly : 35mm deep behind front panel (overall depth including front panel and knobs is 55mm)
• Shrouded header on the power supply connector, no risk for reverse polarity.
• Includes printed user's manual and power cable.

http://www.aemit.be/two_lfos.html