Basic VCO Vintage Edition (black front panel)

Module A-110-2 is a low-cost voltage-controlled oscillator. It's a slightly reduced version of the standard VCO A-110-1. Compared to the A-110-1 the A-110-2 has no sine output and the (expensive) octave rotary switch is replaced by a 3-position toggle switch. In return the A-110-2 is equipped with an additional linear FM input and a soft sync input. A jumper is used to select the range of the tune control between about 1/2 octave and about 4 octaves. The width of the module is only 8 HP compared to the 10 HP of the A-110-1.

All other features are essentialy the same as for the A-110-1.

Explanation of the jumpers and trimming potentiometers:

JP2: CV connection to A-100 bus
JP3: range of Tune control (installed = about 4 octaves, not installed = about 1/2 octave)
JP4: AC/DC coupling of the linear FM input (installed = DC coupling, not installed = AC coupling)
P5: 1V/Oct scale
P6: frequency offset
P7: high-end trim
P8: adjustment +1 Oct. range switch
P9: adjustment -1 Oct. range switch
P10: temperature VCO heater

Current: 150 mA (heat up period about 30 seconds), 60 mA (Long-term current)

  • 150 mA +12V
  • 30 mA -12V
  • 0 mA 5V
  • 50 mm deep
  • Ø 3.60 (5 Votes) Average Rating

This Module is currently available.

$157 Price in €
8 HP Oscillator
submitted Jan 15th 2016, 17:32 by trenchrun | last Change Jan 9th 2017, 11:10 by bgustavo

7 Users are observing this