Module A-160 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Trigger input will take clock signals from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface.
At the outputs, you have access to the sub-divided clock signals, from half the clock frequency down to 1/64. The low/high levels of the output signals are 0V and about +10V.
The A-160 also has a reset input. Whenever a reset signal is sensed, all outputs are set to zero, until the reset voltage disappears.
The Clock Divider can be used in combination with the A-161 Clock Sequencer to produce stepped sequences with a length of from one to eight events.
This Module is currently available.$125 submitted Oct 6th 2012, 13:36 by | last Change Sep 26th 2017, 02:24 by analogdarkside
|EU||The overall condition of this *Doepfer A-160* is | *good* | ###technical c...||€40,00||errorinstruments||View|
|EU||The overall condition of this *Doepfer A-160* is *like new* ####technical ...||€55,00||enn_n||View|
8 Users are observing this