A-180-1

Multiple I

Modules A-180-1 and A-180-2 are simple multi-connectors. They have eight inter-connected sockets, so that you can "multiply" any audio or control signal. From the factory the modules come as two four-fold multiples. But they can be modified as an eight-fold multiple (solder bridge on the pcb). Though these modules are very "primitive" they are required very often in patches (e.g. to distribute a clock signal or a control voltage). Within a big A-100 system sufficient multiples should be planned. The function of A-180-1 and A-180-2 is the same. The modules differ only in the front panel width.

For the distribution of control voltages used for pitch control of several VCOs the buffered multiple A-185-2 is recommended. This module has a built in buffer (and a lot of additional features like CV summing) that avoids small voltage losses that may be heard in pitch control applications.

The A-180-1 front panel without printing is available as a spare part. It can be used e.g. for DIY modules or as a connection unit for other modules.

http://www.doepfer.de/a180.htm

• Module does not draw current
• 10 mm deep
• Ø 3.71 (24 Votes) Average Rating

This Module is currently available.