general advice is leave at least 20% (preferably more) headroom - this is too allow for both inaccurate reporting of power draw/capacity and on-rush requirements of some modules that can be significantly higher than the quoted figures
you should aim for at least 2250mA on the +12v rail for these modules and I'd want to use real bus boards not flying ones
these power supplies are 'designed' to power 1 row of 84hp mostly analogue modules - not 140hp with a lot of heavy draw digital modules
or look to slim down a bit - take the moog out (or power it off its own supply in the rack - if you can do that?) and do you really need voltage block and varigate8+ and the bin seq (and the sequencer in the moog) in this size rack? maybe replace 2 of them with another veils (maybe get the new one!) and get rid of the output module (use veils as final stage for speakers/mixers and add an alm hpo if you need headphones - small, inexpensive and very low power)
maybe you could post another question about the other modules - it does not look to be a particularly balanced rack to me
"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia
Utility modules are the dull polish that makes the shiny modules actually shine!!!
sound sources < sound modifiers < modulation sources < utilities