Hi Jim,
PAM clock is on 120 BPM. I am currently sending triggers to 3 sequencers (stepper acid, metropolix, cyrcadian ryhthm)
Output multipler are set a 1x.
The sequencers are running very very slow (30 bpm to my ears). If i want them to run at 120 BPM i need to set the PAM modifiers at 4x.
Thanks
Mat
-- abstractrhythms
it sounds like your sequencers have their ppqn set to 4 (or some other value) and not one then, which you are expecting... 'clock' is often set higher to maintain stability
it's the same as if you want stable triggers, use a faster clock & a divider and not slow clock and a multiplier...
"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia
Utility modules are the dull polish that makes the shiny modules actually shine!!!
sound sources < sound modifiers < modulation sources < utilities