JCS AND NAND OR Logic Gates

AND NAND OR Logic Gates

The Jake’s Custom Shop AND_NAND_OR eurorack module is a series of configurable binary logic gates. Two sets of inputs (A,B,C) and (D,E,F) each have a dedicated AND gate, NAND gate, and OR gate output. If output AND_1 is unused, AND_2/ NAND_2 act as six input AND/ NAND gates. Leaving IN_C disconnected will provide a 5-input OR gate. Each output has an LED indicator.

Inputs
Power: 10-Pin shrouded IDC. Meets Doepfer eurorack standard.
A, B, C: Input bank 1. Connected directly to AND_1, NAND_1, and OR_1
D, E, F: Input bank 2. Connected directly to AND_2, NAND_2, and OR_2
AND Gates: All inputs are high
NAND Gates: All inputs are low
OR Gates: One or more inputs are high

If AND_1 has a patch cable inserted:
AND_1 = A&B&C
AND_2 = D&E&F
If AND_1 does not have a patch cable:
AND_2 = A&B&C&D&E&F

If input D has a patch cable inserted
OR_1 = A||B||C
OR_2 = D||E||F
If input D does not have a patch cable inserted
OR_1 = A||B||C
OR_2 = OR_1||E||F

Inputs that are not connected to a patch cable are ignored in the logic gate. This way logic can be performed with 1 to 6 inputs.

https://jakescustomshop.com/Modules/ANOLogicGates-Listing.html