flip-sides active

active switch, 2 Inputs, 2 Outputs, MUTE ALL, bidiiretional

eurorack essentials flip-sides active module is the powered version of flip-sides with additional functions.

Now you can swap two signals via CV in and push-button, plus CV in to Mute All.
Works great with any audio or CV signal. And it is bidirectional.

2 LEDs indicate FLIP (green/red) and MUTE (red) status.

Depending on plugged cables, you can use it for example as:

• stereo fx send channel with mute and flip-sides - very interesting on stereo delays, stereo filters, stereo reverbs.

• mono fx send for two FXs - with mute

• simple on / off switch

• swap two CVs, GATEs, TRIGGERs, LFOs, ENVs or CLocks between two modules with MUTE ALL.

You can change the push-button function via jumper on the pcb.

It´s possible to flip/mute signals at really high frequencies.
To Flip or Mute signals you need a CV signal (Trigger, Gate, LFO) with changes from min. + 7V to 0V.

If a cable is plugged into CV in FLIP/MUTE - and - for example signals are flipped/muted at a high frequency - holding down the push-button disables CV in depending on the push-button jumper setting.

flip-sides active comes with 3mm thick aluminium front panel and BEFACO Knurlies.

--> flip-sides active DEMO Video + UNBOXING at SCHNEIDERSLADEN SHOWROOM
https://www.instagram.com/p/B7YuPlSIKVd/?utm_source=ig_web_button_share_sheet

flip-sides active Demo Video on YouTube - PART 1 - stereo fx returns patched to flip-sides active

https://eurorack-essentials.com/flip-sides_active/