This Module is currently available.
Specs are approved by the manufacturerDual 3 channel DC-mixer. The upper mixer output is normalized to the lower mixer input 1.
manikk Dual 3 Channel Mixer is a 2HP module that has 2 independent 3 channel DC-mixers. Each mixer have 3 inputs and 1 output.
INA1,INA2,INA3 is mixed and sent to the output OUTA.
INB1,INB2,INB3 is mixed and sent to the output OUTB.
The output from the upper mixer OUTA (jack 4) is normalized to the first input INB1 (jack 5) of the lower mixer.
This gives the option to use it as a 5 channel mixer.
If no plug is inserted at INB1, then OUTB will be the mix for INA1,INA2,INA3,INB2,INB3.
Both mixer outputs (OUTA and OUTB) have a 1K resistor before the signal is sent to the output-jack.
You can also do some hacks with this module, read more on the website.
