Dimensions
10 HP
25 mm deep
Current Draw
50 mA +12V
30 mA -12V
5 mA 5V
Price
$185 Price in €

This Module is currently available.

MIDI to Control Voltage

The Jake’s Custom Shop MIDI to Control Voltage Eurorack module is a re-configurable digital-to-analog converter based around the MIDI-Muso Integrated Circuit. A total of 18 outputs can be used as 1 V/O CV outputs, gates, triggers, and various MIDI effect triggers. The Module 32 is shipped in mode “4PV.” In this configuration, four MIDI notes on one MIDI channel may be played polyphonically to create chords and complex melodies. Up to 6 MIDI notes each on separate channels can be mapped to individual CV and Gate outputs. This module is also great for use as a drum sequencer with up to 11 auxiliary gates. There are essentially limitless combinations of CV, gate, and MIDI effects.

  • Converts MIDI to CV
  • 1, 1.2, or 0.5 Volts/ per octave
  • Eleven operation modes
  • Operation modes are static during power cycling
  • Monophonic and Polyphonic modes.
  • Up to 6 Polyphonic notes
  • MIDI-in/out for adding multiple MIDI Devices
  • White LED indicators on each Gate and MIDI input
  • 10-octave range (0 to 10 V)

CV Outputs : 0 V (min) to 10V (max)
CV [V per Octave]: 1, 0.5 or 1.2 V/octave
Gate: 0V (min) to 10V (max)

Input
MIDI-IN: MIDI-TRS Type A style input jack

Output - Standard Mode 4PV
MIDI-THRU: Duplicate of the MIDI IN jack.  For sending MIDI messages to another MIDI device.  MIDI-TRS style output jack.
B1, B2, B3, B4 [CV]: MIDI pitch control - controls pitch of an oscillator
B5, B6, C3, C4 [V1,V2, V3, V4]: MIDI velocity control - controls volume of up to 4 oscillators
C1 [PITCH BEND]: MIDI Pitch Bend command
C2 [MOD]: MIDI Modulation command.
C5 [CC71]: Controls filter resonance
C6 [CC74]: Controls filter frequency cutoff
D1, D2, D3, D4, [GATE]: On-state high when a MIDI note is sent.  Corresponds to CV1-CV4 in mode 4PV.
D5 [A Gate 1]: Auxiliary Gate.  MIDI Channel 16.
D6 [CLOCK]: MIDI Clock for syncing other synths.  Produces a 24 pulses per quarter note. 
CHAIN IN/OUT: 2-pin jumper on back of module for chaining multiple JCS MIDI-CV modules together.

https://jakescustomshop.com/Modules/MIDItoCV-Listing.html


submitted Dec 29th 2022, 14:26 by JakesCustomShop | last Change Nov 19th 2023, 02:12 by JakesCustomShop

1 Users are observing this

Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.