Available as an assembled Module and as a DIY project.
This Module is currently available.
Gate / Trigger Generator
The SetonixSynth Detectorist is a 2hp Gate-to-Trigger-to-Gate module, designed to provide useful “duty cycle”-like behavior from any sharp rising edge input.
When triggered by either the Gate Input jack or Manual pushbutton, the Detectorist will produce an adjustable-length Pulse, spanning in length from 12 milliseconds - about 85 seconds over its three ranges. If the Detectorist is re-triggered while the Output is already active, the count will reset but the Output will remain active without dropping to zero, thus “tying” the pulses, or producing 100% duty cycle.
Technical Specifications (Eurorack standard)
Width: 2hp
Depth: 35mm
Peak Current Draw: 15mA @ +12V, 0mA @ -12V
Ranges (approximate):
-Short: 12ms - 1 second
-Medium: 100ms - 6.5 seconds
-Long: 1 second - 85 seconds
1 Users are observing this
SetonixSynth The Detectorist