Vondlescope

CRT Analog X-Y oscilloscope

The Vondlescope is a Eurorack format CRT Analog X-Y oscilloscope paired with an NTSC analog monitor.

The Scope Details

The scope maintains a fully analog signal path - taking signals into the inputs and feeding an amplified signal into the deflection coils of the CRT, which then bends the electron beam on the display. Unlike digital LCD based systems, this means there is no "refresh rate" or latency associated with visualizing the signal. The same signal that is going to your ears is bending the light and shows on the display.

There are 2 primary modes you can choose from "Time-Y" and "X-Y". In "Time-Y" there is a time knob that controls the speed of the beam from left to right, which enables you to see a waveform plotted against time. An optional trigger function allows for holding the position of a wave in the same spot on the display. "X-Y" mode allows you to send signals to both the X and Y axes to plot them against one another. All inputs are buffered, sent to the outputs, then buffered again before going to the scope to prevent interference on the signals.

The Monitor Details

The monitor is an analog NTSC black and white monitor. It is turned 90º on it's side to fit it in the eurorack format. The video signal is also buffered and sent back out to prevent any interference and to ensure the signal is full-strength going to any other output you wish.

Tinted Screen Protectors

Each unit comes with 5 different color (red, green, blue, yellow and orange) acrylic screen protectors that tint the display to your liking. The standard black and white looks great too!

Specs

• 42 HP / 213mm wide
• Eurorack / 3U standard height
• 43mm deep. This should fit in even the smallest cases including the shallow Moog ones
• Power - The module uses a maximum of 600mA on the +12V rail, and 65mA on the -12V rail. It does not use 5V power.

http://synths.vondle.com/