8 HP
20 mm deep
Current Draw
90 mA +12V
10 mA -12V
0 mA 5V
$130 Price in €

This Module is currently available.

Specs are approved by the manufacturer

True stereo Spring Reverb digital emulator

Vintage reverb has come into fashion again!

Purrvrrb is a true stereo and spring reverb digital emulator.
This module comes from the simple idea of creating a bigger and more spacious sound at the end of the chain.

The two pot at the top allow you to adjust the volume of the reverb in each channel.
At 7 o’clock, completely left, you will have a pure dry sound and on the right you will have the wet one.
Between the two extremes there are a myriad of possibilities and combinations between the left and right channels. Small rebounds, reflections and true reverberation with the pot at 12 o’clock.
The small black pot in the middle inside the roundabout symbol is a Feedback control, turning to the right you will be able to control how much output are routed back as input. At its maximum it will be able to self-oscillate.

Inputs and outputs
In the lower part of Purrvrrb you can find the input and outputs jacks.
- Input is a mono jack
- On the left the first pair of jacks marked with L and R, under the mix symbol, are the outputs influenced by the position of the dry/wet pot on the top.
- The other two outputs under the rain cloud are a fixed-parameter stereo pair of completely wet sound.

Technical characteristics
- Width: 8 HP.
- Deep: 20 mm (Skiff-Friendly)
- Current consumption: +12V: 90mA, -12V:10mA.


Ø 5.00 (1 Votes) Average Rating
submitted Jun 14th 2018, 14:47 by purrtronics | last Change Jun 26th 2018, 10:11 by purrtronics

4 Users are observing this