Module is a 1U tile.
This Module is currently available.
CV controlled bidirectional analog switch that can be used as a momentary footswitch adapter for Eurorack
Trig, Gate, Mute, Switch Everything!
Pointeuse has two states. It either connects In/Out to Out/In I or to Out/In II. You can change its state by pressing a footswitch (via the included adapter expander), the backlit button or by sending a voltage signal into the Trig In input making the module highly interactive and controllable.
Pointeuse behavior can be momentary (as long as the button is pressed for example) or latching (the signal switches each time the button is pressed).
The switch has a true bidirectionnal behavior (2:1 or 1:2).
If no jack is connected to In/Out, a 5V signal will be present alternatively at Out/In I and Out/In II.
• Tactile & backlit button
• Trigger input
• Momentary / Latching switch
• Trig In accepts any signals (threshold is 2.5V)
• No bleedthrough
• Clickless mute
• Do not attenuate input signals inc. 1V/oct
• Compatible with all momentary footswitch pedals & sustain pedals
+12V: 20mA | -12V: 11mA | +5V: 0mA
10HP | 35mm deep
4HP expander | 44mm deep
Available with either Intellijel 1U or Pulp Logic 1U Tile faceplate.
7 Users are observing this
These merchants probably sell this module. Huh?